How to Build a Personal Desktop Computer

This instruction will teach you how to make a
personal desktop computer. There are some
steps to follow you. After finishing assembling
all components, you will obtain the computer
for yourself and you can design a system more
targeted toward your own use.

FOLLOW THE STEPS:
Prepare the Mainboard (motherboard)
which is the NVIDA model . If you
want to assemble the well-liked
device, you should use Intel G31,
GMA3100, or AMD 780 Mainboard.

Mount the CPU in the socket of the
Mainboard. You must choose the
correct CPU for your motherboard,
and install it according to it's
instructions. Be careful not to install
the CPU in wrong. Not only would
your computer not work, it could
short-circuit and damage your
motherboard.

Connect the CPU cooler to the
Mainboard.
Attach the RAM(memory) modules in
the corresponding slots .

the
motherboard should have rows of
slots that have 2 or 3 sections that
are different lengths. Make sure the
pins on the RAM cards line up with
the pins on the motherboard
connector. Don't get the RAM slots
mixed up with PCI slots.

The PCI
slots are usually wider.
Open the case and mount the power
supply which is M-ATX type .

Make
sure to connect all the connections to
the drives and the motherboard.
Attach the Mainboard back plate to
the case and check the Mainboard
mounting positions.

The
motherboard's instructions should tell
the position of the motherboard.
Suitably position the Mainboard in
the case .

Mount the Hard disk and connect it to
the power supply and the
motherboard . There should be
separate connections for the power
supply and the motherboard.

In SATA
Hard disk case, should remove the
jumper.
Connect the SATA connectors to the
drives and the USB connectors and
the case switches to the motherboard .

The case and motherboard's
instructions should tell where to
connect the cables
Connect the 20 or 24 pin ATX
connector and the 4-pin power supply
control connector to the motherboard .

Mount the DVD-ROM drive . After
connecting the ATA cable to the
device, hook it up to the power
supply.
Finally, select a compatible operating
system, and follow the instructions to
install ..